View KA350_596641.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.fairchildsemi.com
KA350
3-Terminal 3A Positive Adjustable Voltage Regulator
Features
* * * * * * * Output adjustable between 1.2V and 33V Guaranteed 3A output current Internal thermal over load protection Load regulation (Typ: 0.1%) Line regulation (Typ: 0.015%/V) Internal short circuit current limit Output transistor safe area compensation
Description
The KA350 is an adjustable 3-terminal positive voltage regulator capable of supplying in excess of 3.0 A over an output voltage range of 1.2V to 33 V
TO-220
1
1. Adj 2. Output 3. Input
Internal Block Diagram
Rev. 1.0.0
(c)2001 Fairchild Semiconductor Corporation
KA350
Absolute Maximum Ratings
Parameter Input Output Voltage Differential Lead Temperature (Soldering, 10sec) Power Dissipation Operating Temperature Range Storage Temperature Range Symbol V I - VO TLEAD PD TOPR TSTG Value 35 300 Internally limited 0 ~ +125 -65 ~ +150 Unit VDC C C C
Electrical Characteristics
(VI-VO=5V, IO=1.5A, TJ=0C to + 125C; PD PDMAX, unless otherwise specified) Parameter Line Regulation (Note1) Load Regulation (Note1) Adjustment Pin Current Adjustment Pin Current Change Thermal Regulation Reference Voltage Line Regulation Load Regulation Temperature Stability Maximum Output Current Minimum Load Current RMS Noise, %of VOUT Ripple Rejection Long-Term Stability Symbol Rline Rload IADJ IADJ REGT VREF Rline Rload STT Io(MAX) IL(MIN) VN RR ST Conditions TA = +25C, 3V VI -VO 35V TA = +25 C, 3V VI -VO 35V VO 5V VO 5V 3V VI -VO 35V, 10mA Io 3A, PD PMAX Pulse = 20ms, TA =+ 25C 3.0V VI -VO 35V 10mA I O 3.0A VO 5.0V VO 5.0V TJ = 0C to + 125C VI -VO 10V, PD PMAX VI -VO = 30V, PD PMAX,TA = +25C VI -VO = 35V 10Hz f 10KHz, TA= +25 C VO = 10V, f = 120Hz, CADJ = 0 CADJ = 10F TJ =+125 C Min. Typ. 3.0 0.25 Max. Unit %/V mV % A A %/W V %/W mV % % A A mA %/Vo dB dB %/ 1000HR
0.015 0.03 5 0.1 50 0.2 0.002 1.25 0.02 20 0.3 1.0 4.5 1.0 3.5 0.003 65 80 0.3 25 0.5 100 5.0 1.30 0.07 70 1.5 10 1
3V VI -VO 35V, 10mA I O 3A,PD 30W 1.2
66 -
Note: 1. Regulation is measured at constant junction temperature. Changes in output voltage due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
2
KA350
Typical Perfomance Characteristics
Figure 1. Load Regulation
Figure 2. Current Limit
Figure 3. Adjustment Pin Current
Figure 4. Dropout Voltage
Figure 5. Temperature Stability
Figure 6. Minimum Load Current
3
KA350
Typical Perfomance Characteristics (continued)
Figure 7. Ripple Rejection vs Vo
Figure 8. Ripple Rejection vs Io
Figure 9. Ripple Rejection vs Frequency
Figure 10. Output Impedance
Figure 11. Line Transient Response
Figure 12. Load Transient Response
4
KA350
Typical Application
Input
Output
Figure 13.
CI : CI is required if the regulator is located an appreciable distance from power supply filter. CO : Output capacitors in the range of 1F to 100F of aluminum or tantalum capacitor are commonly used to provide improved output impedance and rejection of transients. In operation, the KA350 develops a nominal 1.25V reference voltage, VREF, between the output and adjustment terminal. The reference voltage is impressed across program resistor R1 and, since the voltage is constant, a constant current I1 then flows through the output set resistor R2, giving an output voltage of VO = 1.25V(1+R2/R1) + IADJ R2 Since IADJ current (less than 100F) from the adjustment terminal represents an error term, the KA350 was designed to minimize IADJ and make it very constant with line and load changes. To do this, all quiescent operating current is returned to the output establishing a minimum load current requirement. If there is insufficient load on the output, the output voltage will rise. Since the KA350 is a floating regulator, it is only the voltage differential across the circuit which is important to performance, and operation at high voltage with respect to ground is possible. Since IADJ is controlled to less than 100A, the error associated with this term is negligible in most applications.
5
KA350
Mechanical Dimensions (Continued)
Package
TO-220
9.90 0.20 1.30 0.10 2.80 0.10 (8.70) o3.60 0.10 (1.70) 4.50 0.20
1.30 -0.05
+0.10
9.20 0.20
(1.46)
13.08 0.20
(1.00)
(3.00)
15.90 0.20
1.27 0.10
1.52 0.10
0.80 0.10 2.54TYP [2.54 0.20] 2.54TYP [2.54 0.20]
10.08 0.30
18.95MAX.
(3.70)
(45 )
0.50 -0.05
+0.10
2.40 0.20
10.00 0.20
6
KA350
Ordering Information
Product Number KA350 Package TO-220 Operating Temperature 0C to + 125C
7
KA350
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.
www.fairchildsemi.com 6/1/01 0.0m 001 Stock#DSxxxxxxxx 2001 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

▲Up To Search▲

Price & Availability of KA350

	To Download KA350 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .